TigerView ChangeLog
Version: 2.1.14
Released: Oct 27rd, 2021
Environment: Beta
Items Released:
- Bug fixes and improvements
Version: 2.1.13
Released: Sep 29rd, 2021
Environment: Beta
Items Released:
- Images loading improvements
Version: 2.1.12
Released: Sep 3rd, 2021
Environment: Beta
Items Released:
- Bug fixing for Upload Only accounts
Version: 2.1.11
Released: May 22nd, 2021
Environment: Live
Items Released:
- Free hand annotations tool.
- Left/Right Laterality tool
- Area measurement tool.
- Angle tool calculation issue.
- Text stamp tool.
- Elliptical tool performance issue
- Light image / hq image window level tool issue (Dark image issue).
Version: 2.1.10
Released: April 14th, 2021
Environment: Beta
Items Released:
- Free hand annotations tool.
- Left/Right Laterality tool
- Area measurement tool.
- Angle tool calculation issue.
- Text stamp tool.
- Elliptical tool performance issue
- Light image / hq image window level tool issue (Dark image issue).
Version: 2.1.9
Released: March 9th, 2021
Environment: Live
Items Released:
- hotfix of the issue with images (functionality which skips loading lightweight jpg images)
- fix of the angle measurement tool issue (angle measurement is sometimes maxing out at 174 degrees)
Version: 2.1.8
Released: February 11th, 2021
Environment: Beta
Items Released:
- Annotations do not contain any numbers now;
- Line tool can draw as many lines as we want;
- Arrow Tool;
- Free Hand Tool.
Version: 2.1.7
Released: January 12th, 2021
Environment: Beta
Items Released:
- Enhancements for Angle Measurement Tool
- The multi line annotation still only allows for 2 lines (or 3 points) and shows a measurement. The annotations should not show measurements of any kind. So for the multi line tool in annotations we want the functionality to be exactly the same as the angle measurements except there should not show any measurements. No angles. Just lines. This goes for all measurements and all annotations.
- The new angle measurement must go up to 180 degrees. Right now it only displays up to 90 degrees. So as you spin the measurement in a full circle it should go from 0 - 180 then 180 - 0.
- Fix of the issue with thumbnail orientation
Version: 2.1.6
Released: December 11th, 2020
Environment: Beta
Items Released:
- The Angle Measurement Tool
Version: 2.1.5
Released: December 10th, 2020
Environment: Live
Items Released:
- Fix of the UI layout issues
Version: 2.1.4
Released: December 10th , 2020
Environment: Live
Items Released:
- All the below features and fixes
Version: 2.1.4
Released: November 30th, 2020
Environment: Beta
Items Released:
- Fix of the issue with messed up annotations when doing the 180 degree rotation
Version: 2.1.3
Released: November 25th, 2020
Environment: Beta
Items Released:
- Changes to the Database in order to get the right DB path during the login rather than using the static path
Version: 2.1.2
Released: on Mon, November 23rd, 2020
Environment: Beta
Items Released:
- Fix of the IML issue in NUUCA Tools
Version: 2.1.1
Released: November 12th, 2020
Environment: Beta
Items Released:
- Fix of the CSL and APL NUUCA Tools calculations
Version: 2.1.0
Released: October 29th, 2020
Environment: Beta
Items Released:
- Version numbers on footer of views
- Fix of the issue when selecting the CSL it does not deselect the last selected measurement type.
- Fix of the issue when the AT measurement value says R some number , but shows L some number on the image....and I think if it is L some number then it will show R some number on the image.
- IML says the wrong thing. We swapped R and L
Version: -
Released: October 2nd, 2020
Environment: Beta
Items Released:
- Fix of the issue: There is a line in the CSL that does not get hidden when clicking the show/hide button on the NUCCA tools.
- Fix of the issue: The APL/CSL combo won't let you move the line.
Version: -
Released: September 25th, 2020
Environment: Beta
Items Released:
- CareStack Integration - Extension of the Cloud Viewer and API to open images, save/load annotations, save/load adjustments by patient_id , token, and stacks params
Version: -
Released: September 22, 2020
Environment: Beta
Items Released:
- CareStack Integration - Changes for thumbnail images to allow CareStack to display the thumbnails in their software
Version: -
Released: September 14th, 2020
Environment: Beta
Items Released:
- The NUCCA measurements need a show/hide button. Right now they have to click the show/hide button from the measurements section.
- The CSL NUCCA measurement issue. If you place the APL then add the CSL it gives the measurement they want. But if you rotate the CSL it changes the laterality of the APL measurement. It should not change the laterality of the APL.
Version: -
Released: August 31st, 2020
Environment: Beta
Items Released:
- CareStack Integration - Completion of Phase 3:
- 1. This is where carestack will request the image information and thumbnail url for each image that belongs to a patient record. Carestack would like to display the thumbnails in their software;
- 2. This is where carestack will open an image into the TigerView Cloud Viewer. Based on the information given in the last step, carestack will want to open 1 or many images in the TigerView Cloud Web Viewer
Version: -
Released: August 18th, 2020
Environment: Beta
Items Released:
- CareStack Integration - Implemented Phase 2 (This is where carestack will send the Patient ID and we will search for a patient by ID and pull open the results in the patient list. If there is only 1 patient select that patient and show thumbnails)
Version: -
Released: August 6th, 2020
Environment: Beta
Items Released:
- CareStack Integration - POST request for token generation to avoid sensitive information being part of logs
Version: -
Released: July 28th, 2020
Environment: Beta
Items Released:Environment: Beta
Items Released:
- CareStack Integration - Authentication endpoint for generating tokens
Version: -
Released: June 26th, 2020
Environment: Beta
Items Released:
- We fixed the issue, when sometimes the BC/CL shows a line after the second click, but should not until the 4th click is done. Shows mid point between first 2 clicks and second 2 clicks.
- We fixed the issue when the AC did not work correctly. So, now the AC measurement is doing the same thing the old site is doing;
- The BC is labeled CL, Cervical Line now;
- We fixed the issue when sometimes some of the NUCCA measurements did not get removed when you clicked remove nucca measurement;
- We fixed the issue when NUCCA sometimes did not stop using the last selection;
- The CR measurement stays metric now even if inches is selected;
- Using the right and left mouse buttons together should scroll the image around when zoomed in;
- Set of fixes for magnifying glass tool - increased speed of rendering scaled image; fixed size of scaled image for images with different resolutions;
- Fixed hq button state for multiply images;
- Fixed issue with rendering wrong image after selecting image when tool was activated.
Version: -
Released: May 5th, 2020
Environment: Beta
Items Released:
- enlarge the nucca, measurement, and annotation buttons by 25%. The buttons on the left seem fine, it's just the size of the buttons from the top
- change the calibration so it only does 1 type of calibration. Right now you can choose XY or X or Y. Just get rid of all those choices and just do XY always.
- Add the 4 arrow precision tool in NUCCA
- The 4 Arrow buttons used for precision movements in NUCCA were also tied to the keyboard arrow keys.
- the fullscreen button also filled the entire monitor (in Chrome it would act like the F11 key).
Version: -
Released: April 23rd, 2020
Environment: Live
Items Released:
- Roll back to the previous version
Version: -
Released: April 20th, 2020
Environment: Beta
Items Released:
- Allow Calibration of image size (DPI) in the web viewer, and save that calibration factor to the cloud database.
- Apply calibration factor value stored in the cloud database to the image when opening the image.
- Add a mm to inches selector in the viewer for switching measurement values from mm to inches.
Version: -
Released: April 15th, 2020
Environment: Live
Items Released:
Version: -
Released: March 27th, 2020
Environment: Beta
Items Released:
- Fix of the issue when a patient has multiple images, the viewer will open up wrong image when clicking on a thumbnail - Example, if a patient has 4 images, when opening up stack 0 it would open stack 4, and when opening stack 1 it would open 3.
Version: -
Released: March 26th, 2020
Environment: Beta
Items Released:
- Fix of the issue when the angle measurement does not show a measurement value - if to create a measurement angle in the live site, then look at it in the beta site there is no angle value
Version: -
Released: March 19th, 2020
Environment: Beta
Items Released:
- Beta web-site is pointed to Live environment in order to provide possibility to test the existing annotations
Version: -
Released: March 11th, 2020
Environment: Beta
Items Released:
- Support of the annotations that already exist in the live environment
Version: -
Released: March 6th, 2020
Environment: Beta
Items Released:
- Feature for storing and retrieving annotations in S3 bucket
Version: -
Released: February 7th, 2020
Environment: Beta
Items Released:
- Enhancements to speed up the process of opening up images;
- Fix of the issue when some of jpeg images do not open
Version: -
Released: January 9th, 2020
Environment: Beta
Items Released:
- Fix for the gamma settings - store the gamma value as an integer in the database ( Example: the default value in the window level program is 1.00 and that would translate to 100 in the database)
Version: -
Released: December 26th, 2019
Environment: Beta
Items Released:
- Clicking CSL acting differently – Click CSL button, adds CSL measurement. Click again and it deselects and the cursor select tool is then selected. Click CSL a third time and the CSL is removed. What we want it to do is remove the CSL when you deselect the CSL button
- APL no longer applies any measurement – The issue with this is when the image is rotated the measurement uses the original orientation bounds to allow clicking. Where it should only allow measurements to be added within the image width and height.
- CSL measurement not adjusting – This one is pretty obvious. You cannot adjust the CSL in any way.
- BC measurement missing a line – This one is also pretty obvious. There is a missing line.
Version: -
Released: December 17th, 2019
Environment: Beta
Items Released:
- Support of 16bit tiff images
Version: -
Released: December 3rd, 2019
Environment: Beta
Items Released:
- Update for the names of NUUCA tools:
- CR= Cranial Rotation
- CSL= Central Skull Line
- APL= Atlas Plane Line
- ACL= Atlas Check Line
- IML= Intermastoid Line
- BC= Body Center
- CC= Condylar Circle
- AC= Axial Circle
- PL= Plane Line
- VAL= Vertical Axis Line
- N-T= N-Tracker
- V-T= V-Tracker
- SPC= Spinous Process Center
Version: -
Released: November 16th, 2019
Environment: Beta
Items Released:
- With an image open if it has been rotated the magnifying tool shows the image without rotation and without the adjustments (window level gamma brightness contrast). See video attached.
- CC tool in NUCCA toolset does a different measurement in the beta site as it does the current live site.
- PL tool in NUCCA shows angles in Beta site and shows distance in the current live site.
- N-T is unknown on the beta site, even after applying all NUCCA measurements.
- N-T is not moveable. This should be moveable.
- With NUCCA toolset please show the name of each tool instead of the abbreviation for each
Version: -
Released: November 12th, 2019
Environment: Beta
Items Released:
- Right after login, but before doing a patient search. The patients list columns are different than the columns that occur after the user searches the patient list. Make sure the columns in the patient list are the same before the patient search as they are after the patient search.
- Change the remove measurement icon in the NUCCA to a slight different Icon to reflect that it is removing the measurements, not a measurement of its own. Basically the remove measurement in the NUCCA tool set needs to remove only the NUCCA measurement. It should not remove any other measurements or annotations.
- Add a warning message, like the one that is in TigerView, that the user will be removing the measurements they have placed.
- Angle measurements should be applied as a 3 click process with 1 click for each vertices. Currently the measurement is 1 click with a tiny measurement applied.
- Add a cursor selection tool to the measurement/annotations windows. Look at the TigerView viewer. The cursor select tool is used to only edit annotations or measurements. It also allows the user to click the delete key to delete the selected annotation or measurement.
- Undo last measurement should only remove the measurements for the window that it is in. Remove measurements in NUCCA tools should only remove NUCCA measurements. Currently the undo last measurement tool is undoing NUCCA measurements. So remove last annotation should only remove the last annotation. Remove last Measurement should only remove the last measurement. Remove last NUCCA measurement should only remove the last NUCCA measurement.
- When trying to login with the wrong password there is no indication that the password is invalid. Please make a notification somewhere that the username or password is incorrect.
Version: -
Released: October 25th, 2019
Environment: Beta
Items Released:
- Feature for applying adjustment values from the database to an image
Version: -
Released: October 9th, 2019
Environment: Beta
Items Released:
- Full screen feature - The full screen button should take the selected image and maximize it to the available space in the viewer. Clicking a second time should shrink the image back down to the original space it was taking up. Selecting different images should replace the enlarged image while in full screen mode
Version: -
Released: October 8th, 2019
Environment: Beta
Items Released:
- The Brightness and Contrast tool
- Moving the little red square left and right changes the brightness, and up and down changes the contrast.
- The tool is above the window level tool
- The reset button under the window level tool will reset the brightness and contrast back to 0.
- The maximum value for each of those settings is 100, the minimum is -100. Center is 0.
Version: -
Released: October 1st, 2019
Environment: Beta
Items Released:
- The right-click should window leveling the image
Version: -
Released: September 30th, 2019
Environment: Beta
Items Released:
- The window level tool remembers the values for each image that is being displayed.
- New image for the Reset button
- “Reset original image processing settings” tooltip for the Reset button
- Clicking the Reset button sends gamma slider back to 1.00
Version: -
Released: September 27th, 2019
Environment: Beta
Items Released:Environment: Beta
Items Released:
- The triangles are a little skinnier.
- The top and bottom triangles are lighter than the middle triangle
- Reset window level button to quickly stretch the window max and min all the way out…and gamma back to 1.00
Version: -
Released: September 26th, 2019
Environment: Beta
Items Released:
Version: -
Released: August 21st, 2019
Environment: Beta
Items Released:
- the feature for displaying multiple images in the same viewer
- fix of the issue with applying window leveling to all images instead of just one.
Version: -
Released: August 9th, 2019
Environment: Beta
Items Released:
- magnifying glass tool,
- fixed and refactored logic for switching between canvas tools and top bars,
- other ui updates and fixes
Version: -
Released: July 12th, 2019
Environment: Beta
Items Released:
- NUCCA tools and some other buttons were moved from old web viewer to the new one;
- Showing multiple images on the same screen;
- Fix of the issue with auto-resizing of the area;
- Fix of the color picker's icon for annotations;
- Button titles when user while hover over;
- We applied compression for the button icons for faster loading;
- A few other small UI updates and fixes
Version: -
Released: June 3rd, 2019
Environment: Beta
Items Released:
- Fix of the issue with grey screen
Version: -
Released: June 3rd, 2019
Environment: Beta
Items Released:
- Showing owners and pets in the patient list
Version: -
Released: May 28th, 2019
Environment: Beta
Items Released:
- Full providers list for the search
Version: -
Released: May 15th, 2019
Environment: Beta
Items Released:
- Reset Password functionality
Version: -
Released: May 11th, 2019
Environment: Beta
Items Released:
- Clean up of the unnecessary files in the server
Version: -
Released: April 24th, 2019
Environment: Beta
Items Released:
- When the thumbnails are not grouped by date, they have a timestamp just below the image in the thumbnail
- When the thumbnails are grouped by date they have the time (Original Created Date) just below the image
- Mouse hovers over a patient record in patient list to change the text color of the row to orange and background color of the row to grey;
- If the patient is selected, the background color is grey;
- City and Email were removed from the find by list;
Version: -
Released: April 15th, 2019
Environment: Beta
Items Released:
- Small fixes for font size and highlighting the button for grouping by date
Version: -
Released: April 8, 2019
Environment: Beta
Items Released:
- Last Name, First Name as the default search option;
- Smaller default size for the thumbnails;
- Storing “last selected thumbnail size” and “last selected find by” for each account;
- Rename of the “Patient” column to “Patient ID”;
- All the “null” were removed from the patient list;
- Lucida Sans Unicode 12pt font for the patient list;
- First “no filters” row of the patient list was removed
- Button size for View, Select All etc. was changed to 90x90 pixels;
- Black background for thumbnail size sidebar was removed;
- “Deselect All” was renamed to “Select None”
- Option to remove the thumbnail group by.
Version: -
Released: April 1st, 2019
Environment: Beta
Items Released:
- Fix of issue with thumbnails - Changing patients will hide the thumbnails until some event has caused a resize to occur
Version: -
Released: March 29th, 2019
Environment: Beta
Items Released:
- Fix of the issue with thumbnails (added support of the images in base64 format)
Version: -
Released: March 28th, 2019 (Beta)
Environment: Beta
Items Released: